This one-day course provides students with the foundational knowledge required to work with the Junos operating system and to configure Junos devices. The course provides a brief overview of the Junos device families and discusses the key architectural components of the software. Key topics include user interface options with a heavy focus on the command-line interface (CLI), configuration tasks typically associated with the initial setup of devices, interface configuration basics with configuration examples, secondary system configuration, and the basics of operational monitoring and maintenance of Junos devices.

This one-day course provides students with foundational routing knowledge and configuration examples and includes an overview of general routing concepts, routing policy and firewall filters, and class of service (CoS). This course is based on JUNOS Software version 9.5R1.8. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the JUNOS Software and monitoring basic device operations.

This three-day course provides students with the skills for configuration, operation, and implementation of JUNOS security platforms in a typical network environment. This course is based on JUNOS Software version 9.5R1.8. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring JUNOS Software for JUNOS security platforms.

This two-day course provides students with intermediate routing knowledge and configuration examples. The course includes an overview of protocol-independent routing features, load balancing and filter-based forwarding, OSPF, BGP, IP tunneling, and high availability (HA) features.

Junos Enterprise Switching is a two-day course that provides students with introductory switching knowledge and configuration examples. This course includes an overview of switching concepts and operations, virtual LANs (VLANs), the Spanning Tree Protocol (STP), port and device security features, and high availability (HA) features.

This three-day course is designed to provide students with the tools required for implementing, monitoring, and troubleshooting Layer 3 components in an enterprise network. Detailed coverage of OSPF, BGP, class of service (CoS), and multicast is strongly emphasized. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations.

This two-day course provides detailed coverage of virtual LAN (VLAN) operations, Multiple Spanning Tree Protocol (MSTP) and VLAN Spanning Tree Protocol (VSTP), monitoring and troubleshooting tools and features, authentication and access control for Layer 2 networks, IP telephony features, and class of service (CoS) on the EX Series Ethernet Switches.

This two-day course provides students with intermediate switching knowledge and configuration examples. The course includes an overview of switching concepts such as LANs, Layer 2 address learning, bridging, virtual LANs (VLANs), provider bridging, provider backbone bridging, VLAN translation, spanning-tree protocols, and Ethernet Operation, Administration, and Maintenance (OAM). This course also covers Junos operating system-specific implementations of Integrated Routing and Bridging (IRB) interfaces, routing instances, virtual switches, load balancing, and port mirroring.

This four-day course provides detailed coverage of OSPF, IS-IS, BGP, and routing policy and how these elements are implemented in a service provider’s network. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in monitoring device and protocol operations.

This five-day course is designed to provide students with MPLS-based virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS concepts such as control and forwarding plane, RSVP Traffic Engineering, LDP, Layer 3 VPNs, next-generation multicast virtual private networks (MVPNs), BGP Layer 2 VPNs, LDP Layer 2 Circuits, and virtual private LAN service (VPLS). This course also covers Junos operating system-specific implementations of Layer 2 control instances and active interface for VPLS.

This two-day course provides students with advanced class-of-service (CoS) knowledge and configuration examples. The course begins with an overview of CoS before going into classification, policing, scheduling, and rewriting. The course then covers class-based forwarding and finishes with a case study.

This two-day course is designed to provide students with detailed coverage of multicast protocols including Internet Group Management Protocol (IGMP), Protocol Independent Multicast-Dense Mode (PIM-DM), Protocol Independent Multicast-Sparse Mode (PIM-SM), and Multicast Source Discovery Protocol (MSDP). Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations.

This three-day course is designed to provide students with the knowledge required to configure and manage subscriber management on devices running the Junos operating system.

This course focuses on the main configuration components of subscriber management, including subscriber authentication, authorization, and accounting (AAA), Dynamic Host Configuration Protocol (DHCP) local server and DHCP relay/proxy agent, the Point-to-Point Protocol (PPP), subscriber addressing, dynamic profiles, subscriber interfaces, Layer 3 and Layer 2 wholesale services, dynamic firewall services, subscriber class of service (CoS), and dynamic multicast services.

This one-day course includes detailed coverage of Web filtering, antivirus (AV), antispam, and content filtering. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Unified Threat Management (UTM) features of the Junos operating system.

This three-day course, which is designed to build off of the current Junos Security (JSEC) offering, delves deeper into Junos security with advanced coverage of IPsec deployments, virtualization, high availability, advanced Network Address Translation (NAT) deployments, and Layer 2 security with SRX Services Gateway devices. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring advanced security features of the Junos operating system.

This two-day course is designed to provide an introduction to the Intrusion Prevention System (IPS) feature set available on the Juniper Networks SRX Series Services Gateway. The course covers concepts, ideas, and terminology relating to providing intrusion prevention using the SRX Series platform. Hands-on labs offer students the opportunity to configure various IPS features and to test and analyze those functions.

This three-day course covers data centre design background, historical and current challenges, today's requirements and drivers, and Juniper Networks recommended solutions. It presents designs to meet those requirements and overcome the identified challenges. The course provides an overview of various network technologies used in data centre network designs, including Fibre Channel over Ethernet (FCoE), Internet Small Computer System Interface (iSCSI), MPLS, various types of virtual private networks (VPNs), Layer 2 technologies, and virtualization. To enhance the learning experience, the theoretical parts of the lecture materials are complemented with hands-on design case studies. The case studies provide further enhancements to student learning experiences, enabling students to apply principles of data centre design best practices to specific examples.

This two-day course is designed to provide introductory troubleshooting skills for engineers in a network operations center (NOC) environment. Key topics within this course include troubleshooting methodology, troubleshooting tools, hardware monitoring and troubleshooting, interface monitoring and troubleshooting, and troubleshooting data and control planes on devices running the Junos operating system.

This two-day workshop is designed to provide students with an understanding of IPv6 concepts including ICMPv6 Neighbor Discovery, and IPv6 addressing and routing protocols including protocol-independent routing, RIPng, OSPFv3, and BGP. Support for IPv6 in MPLS and VPLS, and IPv6 transition methods are also covered.

This two-day course is designed to provide students with Junos scripting knowledge through hands-on script development. The course includes an overview of Extensible Markup Language (XML), Stylesheet Language Alternative Syntax (SLAX), the Junos template and function library, commit scripts, operation (op) scripts, and event scripts. Through demonstrations and hands-on labs, students will gain experience in automating the Junos operating system and device operations. This course is based on the Junos OS Release 11.1R2.3.

This five-day course is designed to serve as the ultimate preparation for the Juniper Networks Certified Internet Expert—Service Provider (JNCIE-SP) exam. The course focuses on caveats and tips useful for potential test candidates and emphasizes hands-on practice through a series of timed lab simulations. On the final day of the course, students are given a six-hour lab simulation emulating the testing topics and environment from the real exam. All labs in this course are facilitated by Junosphere virtual lab devices and are available after hours for additional practice time. This course is based on Junos OS Release 10.3.

This two-day course discusses the configuration of Juniper Networks SA Series SSL VPN Appliances in a typical network environment. Key topics include Secure Sockets Layer (SSL) access technologies, basic implementation, and configuration and management options.

This two-day course discusses the advanced configuration of Juniper Networks SA Series SSL VPN Appliances. Key topics include public key infrastructure (PKI) support, additional authentication and authorization servers, complex policies, customization, virtual systems, troubleshooting, high availability, and Secure Meeting. This course is based on software Release 7.1.

Unified Access Control deployment, basic implementation, and element configuration work with the solution elements such as the Infranet Controller, the Infranet Enforcer, Infranet Agent and 802.1x, to configure secured access to network resources.

This three-day course provides detailed coverage of the configuration of the Junos Pulse Access Control Service (JPACS) offered by Juniper Networks. Students will work with the solution elements—the JPACS, the SRX Series Services Gateways firewall enforcer, Junos Pulse, and the Odyssey Access Client (OAC)—to configure secured access to network resources. Key topics include JPACS deployment, basic implementation, and element configuration. Students will have the opportunity to apply their knowledge in several hands-on labs.

This course discusses the implementation of the Odyssey Access Client product in a typical network environment. Key topics include authentication technologies, basic implementation, and configuration and management options.

Covers all product architecture concepts and initial ScreenOS configurations, static routing, NAT, Policy and Route based VPNs, device management... a must for "any level" of engineer expected to design and implement Juniper Firewall/VPN devices and to pass their JNCIA-FWV certification

Virtual systems, dynamic routing with OSPF & BGP, static routing with Source-Based Routing, Policy-Based Routing & Advanced Destination routing. Multicast IGMP & PIM-SM, NSRP (high availability), and quality of service features; Priority queuing, ingress policing & DSCP marking and shaping.

Building on your base knowledge of ScreenOS configuration and learn to configure many of the SCREEN scanning functions with anti-virus protection, deep inspection (IDP), Web URL filtering, anti-spam, anti-phishing and anti-spyware capabilities

VPN configuration alternatives with; Dynamic peer, Overlapping addresses, Transparent mode, Hub and Spoke, Routing, GRE tunnels, VPN redundancy, Dial-Up VPNs with NetScreen Remote Client

Covering both IDP v4 sensor and IDP blades for the ISG product family (Crystal Echo supplement) participants will learn to configure IDP devices using Security Manager. Tasks will include; Intrusion Detection Concepts, Initial Configuration of IDP Sensor, Policy Basics, Fine-tuning Security Policies, Configuring Other Rule bases, Profiler, Sensor Operation and Command-line Utilities, Managing Attack Objects, Creating Custom Signatures, Maintenance & Troubleshooting and High-Availability.

This two-day course discusses the basic operations of Network and Security Manager. Key topics include server and domain administration, device configuration, template creation and management, policy creation and management, logging, and report generation. Through demonstrations and hands-on labs, students gain experience in configuring, testing, and troubleshooting features of Network and Security Manager.

This two-day course discusses the configuration of Juniper Networks Security Threat Response Manager (STRM) in a typical network environment. Key topics include deploying an STRM device in the network, configuring flows, running reports, and troubleshooting. This course is based on STRM software 2008.3.

Through demonstrations and hands-on labs, students will gain experience in configuring, testing, and troubleshooting the STRM device.

This two-day hands-on workshop presents the basic operations of the Junos Space (version 11.2) Platform and the Service Now and Service Insight applications.

The Junos Space Platform is the necessary underlying foundation for all add-on Junos Space applications. Students will install Junos Space into a multi-node Space Fabric, learn the administrative environment, monitor the Fabric, and perform schema updates. Centralized Junos device management options offered by the Junos Space Platform (including configuration backup, synchronization, Junos image distribution, and application of templates) will be explored. Juniper’s Service Automation strategy using the Junos Space Service Now and Service Insight applications is also covered.

This is a four-day technical training course on the Juniper Networks Wireless LAN Services (WLS) system. The course includes an overview of the full range of HW and SW products, their capabilities and features.  The course describes the WLS system architecture and a project framework for planning a WLS system deployment. The course covers the RF planning capabilities of the RingMaster SW and basic MX (AP Controller) configuration through the CLI.  The course then moves on to describe system and service configuration using RingMaster. The course describes a secure, enterprise-grade employee service in detail and introduces other service options (Web Portal login, voice, open access). Integration issues with the back-end AAA, DNS and DHCP servers are examined and the monitoring, management and reporting capabilities of the RingMaster SW are described. The course uses a combination of lecture as well as practical and group exercises to ensure a high level of hands-on experience with the Juniper Networks WLS system components.

The course is based on the Juniper Networks WLS system v7.4 SW release.

This is a four day advanced training course on the Juniper Networks Wireless LAN Services (WLS) system. The course is designed to build on the skills learned on the IJWL course and take students to the next level of expertise as a Juniper Networks wireless design, implementation or management engineer.

The course describes best practices guidelines for planning an enterprise wide Juniper Networks WLS system with its flexible domain architecture. Best practices for advanced security are presented as are the issues to be considered when deploying voice and mesh services. Centrally managed architectures are also presented. The course includes a look at some advanced troubleshooting techniques.
The course uses a combination of lecture and practical exercises to ensure a high level of hands-on experience with Juniper Networks WLS HW and SW components, advanced authentication options and other advanced features.

The course covers E-series router features, applications, and hardware architecture. It discusses the E-series command-line interface (CLI), including user modes, CLI shortcuts, the file system and file manipulation, and E-series router reload options. The course teaches how to use the CLI to perform a basic configuration of an E- series router, including the configuration of virtual routers.

The course covers the fundamentals of B-RAS, ATM, IP over ATM, bridged Ethernet, PPP over ATM, PPP over Ethernet, VLANs, dynamic interfaces, L2TP, policy management as well as E-series router systems administration. The course will consist of over 50% hands-on exercises.

This course is designed to provide technical network professionals with the skills they need to be able to successfully install, configure, and troubleshoot the E-series router in a dedicated access network running various routing protocols. The course covers the fundamentals of PPP, POS, ATM, VLANs, OSPF, IS-IS, BGP4 as well as E-series system administration. The course consists of over 50% hands-on exercises.

You'll need it to sit this course to pass the JNCIA-M exam. A great introduction into the configuration of JUNOS based devices for the M, T and J Series Routers, includes; OSPF, IS-IS, BGP, RIP, multicast, and Multiprotocol Label Switching (MPLS) configurations. This is definitely not an intro to networking course but more how to configure any JUNOS installed device.

Students attending this class should be able to establish, without assistance, a basic configuration for OSPF, ISIS, BGP, MPLS, and PIM. This lab-intensive, hands-on, five-day course provides an advanced look at popular routing and traffic engineering protocols supported on Juniper Networks M-Series and T-Series platforms

Focuses on the operation and troubleshooting of Juniper Networks M-series and T-series platforms. This course exposes attendees to fault-analysis procedures and troubleshooting techniques similar to those used by engineers in the Juniper Networks Technical Assistance Center (JTAC) to enable rapid problem determination and resolution. It is recommended you attend the CJNR prior to this course but is not mandatory.

This course provides a detailed examination of the JUNOS software policy framework. The course begins with a quick review of policy basics and then quickly moves to advanced topics. It provides detailed discussions of load balancing, policy evaluation, and route creation. How routing policies affect the interior gateway protocols as well as multicast routing are examined. The complexities of implementing and using policies in relation to BGP are then explored. The discussion centers on the default behavior of the basic BGP attributes and their response to policy controls. Most course modules provide examples and use policies that are relevant in real-world networks. Students then implement those examples in the accompanying labs.

This advanced course focuses on designing, deploying, and troubleshooting Layer 2 and Layer 3 provider-provisioned MPLS virtual private networks (VPNs). This is an intensive hands-on workshop, with students participating in a variety of configuration and troubleshooting scenarios. Each student team controls its own provider-edge (PE) and customer-edge (CE) router pairing, with the class sharing three provider routers that form the provider core.

This course is designed to provide a solid foundation to the Session and Resource Control Policy Engine (SRC-PE) when managing routers running JUNOSe software. The SRC-PE software runs on the C-series Controller. In this type of environment, the SRC-PE software typically manages residential and wireless LAN (WLAN) users. This course provides an overview of the SRC-PE architecture, which operates in a distributed environment, although you perform the labs in a local, single-system configuration.

We'll stop at nothing to coach, mentor, advise and supply you with valuable lab time… frankly almost anything (except sit the final test for you) to get you effortlessly jumping through the tasks thrown at you during the JCNIP-M lab exam

Focus is given to router configuration using both the J-Web graphical user interface and the JUNOS software CLI. General router configuration and lab on RIP, static, and OSPF routing and VRRP. Discussions on implementation of common enterprise services such as IPSec VPNs and stateful firewall/NAT. All labs are performed using Juniper J-Series routers.

Stepping up after the OJRE class, this course is action packed covers more advanced configurations and Options... policy & firewall filters, complexities of BGP configuration most relevant to enterprises, migration from a distance-vector to link-state with limited to no downtime, configuration and monitoring of Layer 2 services, including the Compressed Real-time Transport Protocol (CRTP). Multilink PPP (MLPPP), and Multilink Frame Relay (MLFR), configuration of stateful firewall filters, NAT, and IPSec VPNs, including interpretability with other vendors, options for branch-office connectivity, including provider-provisioned Layer 2 and Layer 3 VPNs, private circuits, and IPSec VPNs, Class of Service (CoS) deployment in the enterprise environment and the interaction of COs with other configurations on the router

Configuration, and operational analysis of the WAN Acceleration (WX) and WAN Acceleration Cache (WXC) platforms. Discussion and configuration of Molecular Sequence Reduction (MSR); Network Sequence Caching (NSC), Packet Flow Acceleration (PFA), Application Flow Acceleration (AppFlow), Quality of Service (QoS), Policy-Based Multipath (Multipath), WebView Device Management (WebView), and WX Central Management System (WX CMS).

This three-day course discusses troubleshooting tools and concepts for WX Series platforms and several advanced topics. Key topics include redundancy and backup strategies, encryption, advanced application definitions, and troubleshooting of major technology areas for WX Series devices. This course is based on WXOS software version 5.7.

After you've grasped all the concepts of the IWX platform and are more than comfortable with the web/cli interface it's time to be introduced to "CMS" the powerful management and configuration tool for the WX and WXC. The WX CMS course is designed for administrators who install and use WX CMS software and for network managers who monitor WX/WXC platform performance.